$17.89
54 in stock
54 in stock
8 Port Gigabit Network Switch 10/100/1000Mbps
Main parameters:
Product Type: Gigabit Ethernet Switch
Application level: two
Transfer Rate: 10/100/1000Mbps
Exchange: Storage – Forwarding
Packet forwarding rate: 10Mbps: 14880pps,100Mbps:148800pps,1000Mbps:1488000pp
Port parameters:
Port structure: non-modular
Number of ports: 8
Port Description: 8-port 10/100/1000Mbps
Interface Media: 10Base-T: 3,4, or 5 unshielded twisted pair; 100Base-TX: 5 unshielded twisted pair;1000Base-T: 6 unshielded twisted pair
Transmission mode: full / half duplex adaptiv
Features:
Network standards: IEEE 802.3, IEEE 802.3u,IEEE 802.3ab,IEEE 802.3x
Network Protocol: CSMA / CD
VLAN: not supported
QOS: not supported
Network Management: N
Other:
Status Indicators: Power, Link / Activity Indicator
Environmental standards: Operating temperature :0-40 Celsius
Humidity: 10% -90% RH (non-condensing)
Storage temperature: -40-70 Celsius
Storage Humidity: 5% -90% RH (non-condensing)
Size:145*70*25mm (approx.
【Attentions】
Avoid direct sunlight and keep away from high temperature equipm-ent this may lead to damage or shorten its average service life
Do not place the device near a heat source, such as a hotwater tank or heating equipment
Do not expose the equipment to rain or near the kitchen sink, avolddirect contact with watar
Do not disassamble the equipment randomly to avold damage
Do not use any violence during the installation process
【Troubleshooting Method】
Q1: The power indicator does not light p
Solution:
1. Confrm the power supply of the switch is con-nected correctly, please reconnect the power supply of theswitch or change to another power socket and try to re-power
2. Make sure the power socket is in good conditionReplace the power adapter and try to connect power again.
Q2:LINK/ACT connection indicator does not light p
Solution :
1. Confrm that the conguration of the switch and other equipmentare correctMake sure that the network cable is connected correctly
2.Make sure that the connection cable between the switch and othernetwork equipment is not more than 100 meters(in the default standard mode)
Q3:Poor performance
solution:
1. Check that the switch is running in full duplex mode, if the switch isrunning in a full-duplex state and other devices are running in a half-duplex state, the performance of the switch will be reduced.
2.Confrm that the connecting cables between the switch and otherIEEE802.3 compatible network equipment are of Category 5 orhigher standards.
Q4:No communication between several workstations
solution:
1. Check the connection status of the switch to ensure that the conn-ection is correct
2. Confrm that the network conhguration of the workstation connect-ed to the switch is correct, and change the network conhgurationof the workstation
3. Confr that the switch is in the standard mode and does notstart the VLAN isolation function
4.Restart the switch.
Weight | 0.222 kg |
---|---|
Dimensions | 17 × 15 × 3 cm |
Brand Name | OYBE |
Communication Mode | Full-Duplex & Half-Duplex |
Switch Type | Gigabit Switch |
VLAN | YES |
Package | Yes |
Function | VLAN Support |
Origin | Mainland China |
Transmission Rate | 10/100/1000Mbps |
Choice | yes |
© POWERED BY TEZONNIX GLOBAL SERVICES (TGS)All rights reserved.
Reviews
There are no reviews yet.